The Simulation Strength Analysis on PVC Pipe Blade Propeller Horizontal Axis Wind Turbine with Tip Elbow

Aji Tisa Prayudha; Bagus Wahyudi

doi:10.70822/journalofevrmata.vi.31

Authors

Aji Tisa Prayudha polinema
Bagus Wahyudi state polytechnic of malang

DOI:

https://doi.org/10.70822/journalofevrmata.vi.31

Keywords:

HAWT, propeller, PVC pipe, Tip elbow, CFD simulation

Abstract

Generally, The basic problem of wind energy technology is how to design wind turbines from materials that are easily available in the market, one of the solutions is PVC pipe as a blade material. This material is easily search at building shop . but, it is necessary to analyze the working stress that occurs in PVC blade construction, so that the PVC pipe propeller wind turbine is safe and durrable when applied in the community. The purpose of this study is to determine the effect of wind speed and tip elbow width on working stress. The simulation test method uses Ansys Flow Simulation Software and then the results are exported to Static Simulation to determine the strength of the material. Simulation tests were carried out with wind loads on PVC pipe propellers with wind speeds of 5 m/s, 6 m/s, and 7 m/s and elbow tip widths 100 mm, 110 mm, and 130 mm.

References

Arifin Sanusi, Soedjito Soeparman, Slamet Wahyudi, and Lilis Yuliati, 2016, “Experimental Study of Combined Blade Savonius Wind Turbine,” IJRER vol. 6, no. 2.

Mona Abdelwaly, et.al. 2019. Numerical study for the flow field and power augmentation in a horizontal axis wind turbine. Sustainable Energy Technologies and Assessments 31, 245–253.

Muhd Khudri Johari, Muhammad Azim A Jalil, Mohammad Faizal Mohd Shariff. 2018. International Journal of Engineering & Technology, Vol 7 , April 2018, page 74-80.

Sudarsono, Susastriawan, Sugianto. 2019. Three-Dimensional CFD AnalysisS of Performance of Sall-Scale HAWT Based on Modified NACA-4415 AIRFOIL. International Journal of Technology, 2019, Vol 10, Issue 1, p212

Peter J. Schubel and Richard J. Crossley. 2012. Wind Turbine Blade Design. Energies, MDPI 5, 3425-3449; doi:10.3390/en5093425

Mehmet Bilgili & Abdulkadir Yasar. 2017. Performance evaluation of a horizontal axis wind turbine in operation. International Journal of Green Energy Volume 14, 2017 - Issue 12.

Xin Cai, Rongrong Gu, Pan Pan and Jie Zhu. 2016. Unsteady aerodynamics simulation of a full-scale horizontal axis wind turbine using CFD methodology. Energy Conversion and Management 112 (146–156).

J.M. O'Briena, T.M. Younga, D.C. O'Mahoneyb, P.C. Griffina. 2017. Progress in Aerospace Sciences Volume 92, July 2017, Pages 1-24.

Vinayak Chumbre, T. Rushikesh, Sagar Umatar, Shirish M. Kerur. 2018. CFD ANALYSIS OF AIRFOIL SECTIONS. International Research Journal of Engineering and Technology (IRJET) Volume: 05 Issue: 07 | July-2018

Arnav Kulshreshtha, Sanjeev Kumar Gupta, Piyush Singhal. 2020. FEM/CFD analysis of wings at different angle of attack. Materials to day Proceedings Volume 26, Part 2, 2020, Pages 1638-1643

Rohit Jain1, Mr. Sandeep Jain2, Mr. Lokesh Bajpai. 2016. Investigation on 3-D Wing of commercial Aeroplane with Aerofoil NACA 2415 Using CFD Fluent. International Research Journal of Engineering and Technology (IRJET) Volume: 03 Issue: 06 | June-2016

Benoit G Marinus. 2011. Multidisciplinary Optimization of Aircraft Propeller Blades. P.Hd. Dissertation, Mechanical Eng- Polytechnic Faculty – ROYAL MILITARY ACADEMY. https://www.researchgate.net/publication/260622828.

Sreenadh Chevula, Sankeerth Chillamcharal, Satya Prasad Maddula. 2021. A Computational Design Analysis of UAV’s Rotor Blade in Low-Temperature Conditions for the Defence Applications. International Journal of Aerospace Engineering. Hindawi. Volume 2021 .Article ID 8843453. https://doi.org/10.1155/2021/8843453

Rohit Jain, Sandeep Jain, Lokesh Bajpai. 2016. Investigation on 3-D Wing of commercial Aeroplane with Aerofoil NACA 2415 Using CFD Fluent. International Research Journal of Engineering and Technology (IRJET) Volume: 03 Issue: 06 | June-2016

Alessandro Ceruti. 2019. Meta-heuristic multidisciplinary design optimization of wind turbine blades obtained from circular pipes. Engineering with Computers (2019) 35:363–379

B. Wahyudi, S Sudarmadji, S Sarjiyana and M Maskuri. (2021). Web innovation in horizontal wind pipe turbine propeller, IOP Conf Series: Materials Science and Engineering. Doi:10.1088/1757-899X/1073/1/012080

Yassine Khalil, L. Tenghiri, Farid Abdi, Anas Bentamy. 2019. Improvement of aerodynamic performance of a small wind turbine. Wind Engineering Vol.1.

Mehmet Bakırcı , Sezayi Yılmaz.2018. Engineering Science and Technology, an International Journal Volume 21, Issue 6, December 2018, Pages 1128-1142.

Tsumoru Shintake. 2016. Harnessing the Power of Breaking Waves. Proc. Of 3rd the Asian Wave and Tidal Energy Conference (AWTEC2016). ISBN: 978-981-11-0782-5. http://dx.doi.org/10.3850/978-981-11-0782-5_229

V. Garcia, et.al. 2016. Evaluation of Basalt Fibers on Wind Turbine Blades through Finite Element Analysis. Advances in Materials Science and Engineering- HINDAWI. Volume 2019, Article ID 1536925, 12 pages

https://doi.org/10.1155/2019/1536925

Dawid Cekus et al. 2019. Simulation research of a wind turbine using SolidWorks software. Journal of Physics: Conference Series. 1398 (2019) 012001 doi:10.1088/1742-6596/1398/1/012001

K. Oliphant, Ph.D, M. Conrad, Ph.D, W. Bryce, P.Eng. 2012. Fatigue of Plastic Water Pipe: A Technical Review with Recommendations for PE4710 Pipe Design Fatigue, Pipelines 2012: Innovations in Design, Construction, Operations, and Maintenance, Doing More with Less.

Steven Folkman, Ph.D., Jay Parvez. 2020. PVC Pipe Cyclic Design Method, Pipelines 2020.

A.S. Mohruni et al. 2021. Feasibility study of pvc pipes as vertical axis wind turbines type savonius bucket for remote areas application. Internasional Journal on Energy Convertion Volume 9, march 2021, ISSN 2281-5295.

J.M. O'Brien a, T.M. Young , J.M. Early ,P.C. Griffin. 2018. An assessment of commercial CFD turbulence models for near wake HAWT modelling. Journal of Wind Engineering and Industrial Aerodynamics Volume 176, May 2018, Pages 32-53

M.G. Khalafallah, A.M. Ahmed & M.K. Emam. 2015. CFD study of some factors affecting performance of HAWT with swept blades. International Journal of Sustainable Energy, volume 36, Pages 489-501.

B. Wahyudi, et.al. 2022. Simulation Study of Horizontal Axis Wind Turbine using PVC Pipe Propeller with Elbow Tip, Journal Physics and Engineering EUREKA No. 5 September.

Jacob R. West and Sanjiva K. Lele . 2020. Energies 2020, vol 13, page 1078.

Vicky K Rathod and S.Y. Kamdi, 2014, Design of PVC Blade Horizontal Axis Wind Turbine for Low Wind Speed Region, International Journal of Engineering Research and Application, vol 4, Issue 7, pp. 139-143.

Vicky K Rathod and S Y Kamdi, (2014). Design and Fabrication of PVC Bladed Inexpensive Wind Turbine, Journal Mechanical and Civil Engineering (IOSR-JMCE), Vol 11. Issue 4, pp. 114-119.